Acceso a la CLI
Opciones de Comando
Ejemplo de respuesta CLI
La siguiente pantalla es una continuación del ejemplo anterior, en el que se crean
tres LUN en el mismo grupo de unidades físicas.
40
Guía de usuario de la interfaz de línea de comandos de Modular Smart Array 1000/1500 cs
: se creará la unidad LUN 1.
1
DATA="DISK111-DISK114"
número 1 al LUN.
: se utilizará el nivel RAID 5 al crear el LUN.
RAID_LEVEL=5
: se utilizará un tamaño de stripe de 32 al crear el LUN.
STRIPE_SIZE=32
: se utilizarán 1000 MB del tamaño disponible al crear el LUN.
SIZE=1000MB
CLI> ADD UNIT 1 DATA="DISK111-DISK114" RAID_LEVEL=5
STRIPE_SIZE=32 SIZE=1000MB
First volume to be configured on these drives.
The logical unit size has been adjusted by 4MB for optimal
performance.
Logical Unit size = 996 MB
RAID overhead = 498 MB
Total space occupied by new unit = 1494 MB
Free space left on this volume = 24533 MB
Unit 1 is created successfully.
CLI> ADD UNIT 2 DATA="DISK111-DISK114" RAID_LEVEL=5
STRIPE_SIZE=32 SIZE=2000MB
Logical Unit size = 2000 MB
RAID overhead = 1000 MB
Total space occupied by new unit = 3000 MB
Free space left on this volume = 21533 MB
Unit 2 is created successfully.
CLI> ADD UNIT 3 DATA="DISK111-DISK114" RAID_LEVEL=5
STRIPE_SIZE=16 SIZE=4000MB
Logical Unit size = 4000 MB
RAID overhead = 2000 MB
Total space occupied by new unit = 6000 MB
Free space left on this volume = 15533 MB
Unit 3 is created successfully.
: añade las unidades de la 11 a la 14 del cuadro