Control Descriptions - Fimar MSD/300P Manual De Uso Y Mantenimiento

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ BELL PACKAGING MACHINE MCD
Description
Power
Power supply
Length of sealing bar
Flow rate of vacuum
pump
Maximum vacuum
percentage
Useful dimensions of
vacuum chamber
Appliance
dimensions
Packaging
dimensions
Net weight
GB
Installation type
Noise level

CONTROL DESCRIPTIONS

The appliance is equipped with the listed control devices, required to run its main functions.
A) Main switch: used to turn electrical power on and off.
B) Button: it activates and deactivates the equipment operation.
C) Display: it shows warning/alarm messages and working parameters.
D) Button (SET): it sets up the operation parameters of equipment.
E) Button (+): to increase the value of the selected parameter or to scroll the programmes.
F) Button (-): to decrease the value of the selected parameter or to scroll the programmes.
G) Button (PUMP/GASTRO): it activates and deactivates the pre-heating of the vacuum
pump.
When the equipment is operating with closed holding bell ??, press the button once to
carry out quick sealing and to open bell.
H) Vacuum gauge: it detects the negative pressure generated by the equipment inside
bell.
L) Printer: it prints one or more receipts showing the date of expiry of the product and, by
means of the special keyboard, it shows the ingredients contained in the bags on the
product (for model MCD/S - MCD/CS only).
To replace the paper roll for receipts press button(L1) and pull both side flaps of
the housing outwards.
Unit of
MCD/520CS
measure
kW 0,83
230V/1N/50-
V/Ph/Hz
60Hz
mm 520
m³/h 25
mm 530x530x200
mm 630x690x1050
mm 830x830x1280 1050x850x1350 1050x850x1350 1250x850x1350
kg 93
dB (A)
MCD/650CS MCD/750CS
1,31
400V/3N/50-60Hz
650
40
98%
660x540x200 760x540x200
770x690x1050 870x690x1050
150
Floor installation
< 70
- 16 -
MCD/950CS
1,5 2,2
750 950
63 100
960x540x200
1050x690x1050
175 200
English language