Important Safety Instructions - Goalzero YETI MPPT Guia Del Usuario

IMPORTANT SAFETY INSTRUCTIONS

Please save these instructions
Read all the instructions and cautions before
beginning installation.
Do NOT disassemble or attempt to repair the module.
Do NOT allow water to enter the module, or the Goal Zero
Yeti Lithium.
Make sure all connections are tight and secure before using.
Do NOT exceed 22V (350W) input for the module; this can
cause serious damage to the Yeti Lithium and potential
bodily injury. Check third party solar panels specs before
attempting to use them with the module.
Do NOT chain solar panels in series (connecting positive
to negative, positive to negative, etc.), as this can result in
dangerously high levels of voltage that can cause serious
damage to the Yeti Lithium and
potential bodily injury.
Use ONLY with appropriate Goal Zero Yeti Lithium
Portable Power Stations.
WARNING: Never connect a power source to the module before
installing into the Yeti Lithium. Always connect the module to the Yeti
Lithium before connecting any power source.
WARNING: Do not exceed 22V input for the module under standard
use. Doing so can cause serious damage to the Yeti Lithium and
potential bodily injury. Take note of voltages when using third party
solar panels with the module. Do not chain solar panels in series
(positive to negative, positive to negative, etc.), as this can result in
dangerously high voltages.
1 1