Sony HMI-3000MT Manual Del Usaurio página 25

Cleaning the image processor unit
The image processor unit is manufactured with materials
that can be sterilized. However, depending on the
disinfectant used, performance may be impaired or the
surface finish may be damaged. Observe the following
points to protect the unit.
• Wipe the surfaces of the unit with 50% to 70% v/v
concentration isopropyl alcohol or 76.9% to 81.4% v/v
ethanol.
• To remove stubborn dirt, wipe with a soft cleaning cloth
using mild detergent diluted in water, and then clean
using the chemical solutions above.
• Do not use benzine or thinners, acidic cleaning
solutions, alkaline cleaning solutions, abrasive cleaning
agents, or chemically-treated wipes that may damage
the surfaces for cleaning or disinfection.
• Do not wipe with force using a cloth that may have dust
or other particles adhering to it. Doing so may scratch
the surfaces.
• Do not place rubber or plastic objects on the unit for an
extended period of time. Doing so may cause surface
deterioration or cause the surface to peel.
Cleaning the head mounted monitor
The head mounted monitor, excluding the lens, is
manufactured with materials that can be sterilized.
However, depending on the disinfectant used,
performance may be impaired or the surface finish may
be damaged. Observe the following points to protect the
unit.
• Wipe the surfaces of the unit with 50% to 70% v/v
concentration isopropyl alcohol or 76.9% to 81.4% v/v
ethanol.
• To remove stubborn dirt, wipe with a soft cleaning cloth
using mild detergent diluted in water, and then clean
using the chemical solutions above.
• Do not use benzine or thinners, acidic cleaning
solutions, alkaline cleaning solutions, abrasive cleaning
agents, or chemically-treated wipes that may damage
the surfaces for cleaning or disinfection.
• Do not wipe with force using a cloth that may have dust
or other particles adhering to it. Doing so may scratch
the surfaces.
• Do not place rubber or plastic objects on the unit for an
extended period of time. Doing so may cause surface
deterioration or cause the surface to peel.
Cleaning the lens
If the lens becomes cloudy or dusty, clean using the
following method.
• Wipe lightly with a soft, lens cloth.
• Do not use lens cleaning fluid, alcohol, water, or other
solutions.
Cleaning the rear pad
If dirt is difficult to remove from the surface of the rear
pad, remove the rear pad and wash separately. After
washing, wipe off any moisture with a dry cloth and then
reattach to the head mounted monitor.
• Removing the rear pad
The rear pad is attached using six clasps. Stretch the pad
upwards and remove the pad from the upper clasps, then
remove the pad from the lower clasps.
• Attaching the rear pad
Attach the pad using the lower clasps, then stretch the
pad upwards and attach the pad using the upper clasps.
Note
Check that the holes in the rear pad fit in all six clasps.
The pad may come off if it is not secured by all the
clasps.
If unsanitary matter adheres to the unit
Follow the cleaning instructions above, and wipe it off.
AC adapter
The life expectancy of the AC adapter is about 5 years
under normal operating temperatures and normal usage
(8 hours per day; 25 days per month). If usage exceeds the
above normal usage frequency, the life expectancy may
be reduced correspondingly.
25
Precautions