Manufacturer's Warranty - Hilti ST 1800 Manual De Instrucciones Original

Setting forward or reverse rotation
Changing the bit
CAUTION
Risk of injury. The accessory tool may be hot or have sharp edges.
▶ Wear protective gloves when using the power tool and when changing accessory tools.
Fitting the depth gauge
WARNING
Electrical hazards There is a risk of electric shock if a screw is driven into a concealed electric
cable and, at the same time, the bit holder or depth gauge is touched.
▶ Hold the screwdriver only by the grip when driving or removing screws.
Removing the depth gauge
CAUTION
Risk of injury The depth gauge may hinder the operator if fitted but not used.
▶ Remove the depth gauge from the tool.
Setting the depth gauge (accessory)
Removing screws
6 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
7 RoHS (Restriction of Hazardous Substances)
Click on the links to go to the table of hazardous substances: qr.hilti.com/r2991 (ST 1800)
There is a link to the RoHS table, in the form of a QR code, at the end of this document.
8

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
14 English
Printed: 24.07.2018 | Doc-Nr: PUB / 5070703 / 000 / 05
3
5
4
378502
*378502*