Fitting The Filters; First Time Of Switching On - Johnson Controls YORK YHM Serie Manual De Operación Y De Instalación

FITTING THE FILTERS

The fan coil comes with air filters designed to absorb micro-
scopic particles of dust, pollen and mould/mildew.
To install, proceed as follows:
- Put the installation on/off switch to "off".
Installing the air filter reduces the airflow and conse-
quently the cooling and heating capacity. In this case it is
recommended to use the air-conditioner at MEDIUM or
HIGH speed.

FIRST TIME OF SWITCHING ON

Before starting up the fan coil for the first time and carrying
out the functional test, it is indispensable that:
- All the safety conditions have been satisfied
- The appliance is correctly positioned
- The electrical, cooling circuit and condensate drain con-
nections have been carried out correctly
- The shutoff valves are open.
Then:
- Put the installation on/off switch to "on"
YHMH model
- Activate the fan coil using the remote control
- Check operation in the various modes
- Check the fan speeds of operation
See the instructions in the User Guide on how to use the
remote control.
YHMY model
- The fan coils are controlled through wall-mounted electro-
mechanical controls of the type TR or ATR (not provided,
but available as accessories).
See the instruction sheet of the installed control for fan coil
operation.
AUTOMATIC RESTART
The fan coil is fitted with a device that allows automatic
restart in the event of a blackout and subsequent return of
the power supply.
The fan coil restarts in the previously set mode of opera-
tion.
Clean air filters once every 2 weeks.
Keep the air filters sealed until they are to be used.
When inserting the air filters avoid contact with the
exchanger coil or use suitable personal protective equip-
ment.
ON
OFF
Installer
Installer
20°
°C
13
GB