Description; Operation - Dustcontrol DC AirCube 2000 Manual Original

Description

Th e DC AirCube 2000 air cleaner is intended for
cleaning the air in a work area and is intended for use as
a compliment to spot extraction. Air is passed through
a combination fi lter and a microfi lter. Th e HEPA fi lter
actually separates particles to 99.995%. Th e com-bination
fi lter separates the majority of the particles and thereby
prolonging the life of the microfi lter.
When a loss of suction capacity is experienced the pre-
fi lter should be changed. If the suction capacity does not
increase after the pre-fi lter change then the Hepa fi lter
should also be changed.
Th e fan has variable speed settings which allow for econo-

Operation

Connect the machine to a suitable power source accor-
ding to the specifi cation of the machine. When using an
extension cable with the machine, ensure that the con-
nection is water tight and the extension cable is suitably
rated.
mical running, for example during the night.
Th e DC AirCube 2000 can also be used to discharge
air from work places which must be kept under negative
pressure. A 250 mm hose can be attached to the fan out-
let where necessary.
Without accessories the machine is made for using in
an upright position to minimise dust whirling from the
outlet.
Th e DC AirCube 2000 aircleaner has two speed settings
which allows for economical running, for example during
the night.
DC AirCube 2000 - 9 Part No 94146-B