Mounting And Stacking Instructions - Tripp-Lite B007-008 Manual De Operación

200603163 93-2538 B007-008 manual.qxd
Appendix
Mounting and Stacking
For convenience in large installations, the unit is supplied with the necessary hardware for it to be rack
mounted in a 19" (1U) system rack, or stacked.
For Rack Mounting:
1. Screw the mounting brackets into the sides of the unit.
2. Slide the unit into the rack and secure it to the rack.
For Stacking:
1. Screw the stacking brackets into the corners of the unit. Note that there is a top and bottom half to
each bracket. The bottom half has a concave surface and two screw holes; the top half has a convex
surface and one screw hole.
2. Line up the four bottom brackets of the top unit with the four top brackets of the bottom unit.
3. Fit the top unit into place.
4/19/2006 1:45 PM
14
Page 14