bebeduE Moon Guia De Inicio Rapido página 8

E
UK
"IMPORTANT": PLEASE READ THE
INSTRUCTIONS FOR USE CAREFU-
LLY AND SAVE THEM FOR FUTURE
USE.
The bed safety railing insures worry-free nights, keeping your baby safe and avoiding
any possible falls.
INSTRUCTIONS TO ASSEMBLE THE BED SAFETY RAILING
1. Join the flat bars (C) to the folding structures (E) (fig.1).
2. Open the sides and unfold the bars in such a way that they form a 90º angle (Fig. 2).
3. Join the curved bars (D) together and slide them into the top edge of the cover. Next
fix the curved bars, with the cover, into the side bars of the folding structure (fig.3).
4. Fold the structure down, simply lift both devices found on each side of the railing and
let it drop while holding on to it (fig.4a and 4b).
5. Join the round bars (B) together and slide them into the bottom edge of the cover. Fit
the bar in with the aid of the device on the side bar (fig.5a and 5b).
Make sure that each bar has its safety button-clip correctly blocked.
INSTRUCTIONS TO INSTALL THE BED SAFETY RAILING
Once the railing is assembled, place the base of the railing under the mattress, in such a
way that it remains immobilized (fig.6).
Make sure the structure is correctly assembled and blocked to avoid your child from
suffering any possible injury.
TO LOWER AND LIFT THE BED SAFETY RAILING
Simply lift both devices found on each side of the railing and let it drop while holding on
to it (fig.7).
To raise the safety railing, simply lift it until you hear the devices click (fig.8).
INSTRUCTIONS FOR DISMANTLING THE BED SAFETY RAILING
Take the bars apart by pressing down on the button-clips to release them. Dismount the
cover by removing the bars and folding the two wings. Place all the parts in your bag
for comfortable storage.
INSTRUCTIONS FOR CLEANING THE BED SAFETY RAILING
Dismount the cover by following the steps in the previous section.
The bedding is completely washable (for more information please read the washing
instructions on the label).
Use a damp cloth to clean the metallic part, and then dry it to avoid any rusting.
8