Follett Ice Pro EDB1000 Manual De Instalación Y Servicio página 13

Agitator removal
1. Remove all ice from dispenser.
2. Disconnect power to dispenser and icemaker.
3. Remove window from upper ice storage section.
4. Remove connection pin from left side of agitator bar
(Fig. 16).
5. Move agitator bar toward left dispenser wall (Fig. 17.1)
while pulling out the right side from bearing (Fig. 17.2).
6. Push right side of agitator bar toward rear right corner of bin
(Fig. 18.1) while pulling out the left side from the drive shaft
(Fig. 18.2).
7. Position pin end of agitator in window frame and spiral
clockwise out opening (Fig 19).
Fig. 16
Fig. 17
Fig. 18
Fig. 19
13
1
2
2
1
1
2