Getting Started - HORIZON ELITE T5 Guia De Funcionamiento

GETTING STARTED

1) Check to make sure no objects are placed on the belt that
will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill ON.
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing making
sure that it is secure and will not become detached during
operation. Insert the safety key into the safety keyhole in
the console.
5) Select your xID account, User, Guest, or Edit a User using
and press .
6) When you log in for the first time as User 1-4, you will be
prompted to enter your xID information.
a) Enter your xID account number using KEYPAD. After the
final input, press .
b) Enter your passcode using KEYPAD to select the
numbers. After the final input, press
c) If you key the incorrect number at any point while
entering your xID or passcode, press and hold
3-5 seconds to clear the selection and begin again.
A) QUICK START
Simply press
count up from 0:00.
The speed will default to 0.5 MPH.
Incline will default to 0%.
B) SELECT A PROGRAM
1) Select a PROGRAM using
2) Set workout program information using
3) Press
NOTE: You can adjust the resistance and
incline levels during your workout.
C) FINISHING YOUR WORKOUT
When your workout is complete, the console will
display "workout complete" and beep.
.
Your workout information will stay displayed
on the console for 30 seconds and then reset.
for
TO CLEAR CURRENT SELECTION
To clear the current program selection or
screen, press and hold
to begin working out. Time will
and press
and press after each selection.
to begin workout.
for 3 seconds.
.
13