GB
Making ice cubes
1. Fill the ice tray (not supplied) with ¾ full of clean water.
2. Place the tray in the top freezing drawer.
3. Close the door.
To remove the ice cubes from the tray, put the tray under running water for a while and then twist the
tray slightly to loosen the ice cubes.
Reversing the fridge door
1. Unscrew the right‐hand side hinge and transfer it to the left side.
2. Attach the left fridge door stop to the door on the left. Screw into place.
3. Fit the door onto the left hinge and screw into place.
Ensure the door opens and closes smoothly.
Fridge defrosting
The fridge defrosting process is carried out automatically every time the compressor stops.
The defrost water is automatically routed to the drain port and into a tray placed on the top of the
compressor to the rear of the appliance from which it evaporates.
9