Disassembling After Use; Troubleshooting - Telefunken SJ21 Manual Del Usuario

Disassembling after use

Warning: Always unplug the appliance before retrieving the accessories.
1. Turn the cover anti-clockwise to retrieve it.
2. Retrieve the juicing bowl by pulling it from the main body.
3. Retrieve the filter by pulling it from the juicing bowl. Then retrieve the auger by pulling it from the
filter.

TROUBLESHOOTING

Problems
The appliance is not
working after plugged in.
Noise during operation.
Causes
1. Wrong assembling of accessories.
2. Use of forbidden ingredients or
overloading of ingredients.
3. The cover is not well assembled.
4. The pulp spout is clogged.
5. You have overworked the nominal
working time of the machine (20
minutes), which is now into the motor
protected mode.
1. Squeaking/cracking noises.
2. Vibration of motor/accessories.
1. Disassemble and assemble again all
accessories.
2. Switch off the appliance and remove the
forbidden or overloaded ingredients.
3. Switch off the appliance and replace
correctly the cover.
4. Switch off the appliance and remove the
clogged pulps.
5. Wait for the motor to cool down for 10
minutes before using again the
appliance.
This is normal: these noises indicate your
machine is extracting the juice.
10
ENGLISH
Solutions