MAC Audio SOUNDBAR 1000 Owner’s Manual página 19

USE YOUR SOUNDBAR
This section helps you use the Soundbar to
play audio from connected devices.
Before you start
• Make the necessary connections described
in the user manual.
• Switch the Soundbar to the correct source
for other devices.
Adjust the volume
1. Press +/- (Volume) to increase or decrease
the volume level.
• To mute the sound, press
control.
• When mute is on, the POWER indicator
on the front panel of main unit blinks in
red.
• When mute is off, the POWER indicator
stops blinking and the light is off.
• To restore the sound, press
press VOL +/-.
2. To increase or decrease volume, press VOL
+/- on remote control.
POWER AUX
0
• When pressing VOL+, the indicators on
the front panel light up from left to right.
• When pressing VOL-, the indicators on
the front panel light up form right to left.
• All indicators on the front panel blink
twice when the volume is set to either
minimum or maximum.
Note
The volume might be influenced by MP3 or
Bluethooth player.
on remote
again or
INPUT
LINE OPTICAL PAIR
32
Choose your sound
Select predefined sound modes to suit your
video or music.
Press the sound setting buttons on the remote
control to select a sound mode.
• When a button is pressed, the POWER
indicator blinks once.
• MUSIC: Recreate the original recording
environment of you music, in the studio or
at a concert.
• MOVIE: Enjoy a cinematic audio experience,
specially enhanced for movies.
• NEWS: Hear every word with optimized
speech and clear vocals.
• CLASSIC: Flat and pure sound mode. Ideal
for listening to classical music.
Play audio through Bluetooth
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and
then listen to the audio files on your device
through your Soundbar speakers.
What you need:
• A Bluetooth device which supports version
3.0 + EDR.
• The operational range between the
Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1. Press on the remote control to switch the
Soundbar to Bluetooth mode.
The PAIR INPUT indicator on the front
panel of main unit blinks slowly.
2. On the Bluetooth device, switch on
Bluetooth, search for and select
MAC AUDIO SB 1000 (see the user manual
of the Bluetooth device on how to enable
Bluetooth).
3. When the Bluetooth connection succeeds,
the Bluetooth indicator lights up.
If no Bluetooth device is connected within
two minutes, press PAIR on remote control
to activate the pairing mode again.
19