Changing The Screen Display Mode - Sylvania 6427GFF Manual Del Usuario

DTV

CHANGING THE SCREEN DISPLAY MODE

2 types of display mode can be selected in the digital
mode.
You can select your favorite display mode and enjoy
the program.
1 2
4 5
7 8
– /ENT
0
CH K / L
VOL
MENU
INPUT
MENU
SELECT
1
Display the MENU screen.
• Press [MENU] on the remote control.
The following MENU screen is displayed.
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
2
Select "DTV SET UP".
• Using [CH K / L ] on the remote control, select
"DTV SET UP".
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
• When you press [VOL X ] on the remote control,
the MENU screen will be displayed as below.
DTV DISPLAY [LETTERBOX]
DTVCC
D.S.T.[Daylight Saving]
TIME ZONE
3
6
9
CHANNEL
RETURN
+ 100
CH
VOL
CH
VOL X / Y
SLEEP MUTE
[ON]
[ALASKA]
3
Select the display mode.
• Every time you press [VOL X / Y ] on the remote
control, [LETTERBOX] and [ZOOM] will be
switched alternately.
D10-0
LETTERBOX
[LETTERBOX]
Display the digital-supported program in full-
screen.
Black borders will spread in the upper and
lower screen.
[ZOOM]
Enlarge and display the center area of the digital-
supported program.
The right and left image will be cut off.
4
To exit the menu, press [MENU] on the remote
control.
NOTE:
You may not switch the display mode depending on the pro-
gram.
D10-0
ZOOM
19
EN