Logan LGKWM72CAM Manual De Usuario página 20

Appendix: The installation of "LoganCam"
15. Connecting the Camera via "LoganCam"
Connect the monitor with a computer/notebook via the included USB cable.
Install the SIPCam software from the included CD-ROM and
follow the installation instructions on the screen. After installation
is completed, this icon is shown on your desktop.
Double-click on the icon and run the SIPCam. In the hidden icons [right hand side in
the below task bar] you find the icon for SIPCam (see picture). Click with the right
mouse button on the icon. Then select "Option" (see picture).
Choose under "Camera Select" the "USB Video device" and click on the "OK" button.
When you already installed the LoganCam, you can login with the Cam ID/User and
Login Password (both you can find on the monitor back side).
20