Publicidad
Idiomas disponibles
Idiomas disponibles
5. Front of the wireless camera
with the IR night lights
6. Remote Control
7. Charging the Receiver
Plug the Micro USB cable* (* included) into the Micro USB slot of the receiver. Then
connect the USB port to the USB slot of a PC or an USB 12V/1A charging adapter*
(* included). Charging time is ~ 3–4 hours. While loading, the RED LED lights
continously. When the receiver is fully loaded, the RED LED turns off.
Menu: Press Menu key to show Main Menu.
Cam: Press Camera key to change channels.
Screen: Press Screen key to show 4 video same
time, press it again, video auto to show one by one,
press it again to enlarge one of 4 video.
Rec: Press Video Record key to record a video,
press it again to stop recording.
Press OK key (round key in the middle) to confirm
the selection.
Press UP / DOWN / LEFT / RIGHT navigation key
(the keys with the arrows) to select the mode
7
Publicidad
