Olimpia NC 580 Manual De Instrucciones página 19

2.3. Set-up adjustments
Warning : Please be aware that any manual adjustment of the sensors (different from factory settings)
can affect the accuracy of the counterfeit detection! Do not change any adjustment without the explicit
request of Olympia or one of her distributors!
To enter the sensor set-up menu to adjust the sensors please follow the next Steps:
1. Switch off the NC 580
2. Push and hold on the CUR-button and switch on the NC 580
3. By pushing the "MODE" button you can switch between the several sensor adjustments.
4. By pushing the "ADD" button you can increase the sensor intensity with the "BAT" button you can
decrease the sensor intensity.
5. To return to the factory settings please switch off the NC 580. Push and hold on the "CLR" button and
switch on the NC 580 and push once the RESET button.
parameter
Width sensitivity level
UV sensitivity level
MG/MT s sensitivity level
Colour sensitivity level
Infra red sensitivity level
Paper sensitivity level
Feeder/Thickness Adjustment
sensor function
Height of the banknote
Ultra violet detection
MG/MT magnetic detection
Colour image sensor
Infra red detection
Thickness of the banknote
Olympia NC 580
- 19 -
default value
4
4
2
4
4
4
The adjusting knob