Playing Back Via Bluetooth - Eton rukus solar Manual De Usuario

playiNG BaCk Via BlUETooTH

1. Press the on/oFF button to turn on the unit.
The power indicator lights up.
2. Press the Bluetooth button to switch the sound source to
Bluetooth mode. The indicator appears on the display.
3. Hold the button for 3 seconds to place the unit in pairing
mode. The indicator starts blinking rapidly. unit will give off
two short beeps.
NoTE: The indicator turns solid after the unit is successfully
connected. If the indicator starts to blink slowly after
3 minutes, the pair was unsuccessful.
4. open the Bluetooth settings menu on your Bluetooth-enabled
mobile device or computer. once it is recognized, "rukus solar"
will appear on the display of the Bluetooth-enabled device.
select "rukus solar" to pair and connect with your device.
NoTE: on an iPhone or iPad, tap "rukus solar" to select.
If prompted for a password, enter "1234".
5. once Bluetooth is connected, seclect the music and press
the button on your device. The unit will playback music
automatically.
NoTE: Playback time on built-in battery is ~8 hours, depending
on music level and other factors.
playiNG BaCk Via aUX
You can enjoy the sound from an external device such as a
portable digital music player. Be sure to turn off the power of the
external device before making any connections. For details, refer
to the instruction manual of the device to be connected.
1. Connect any device with headphone or line out jack with a
3.5mm line in cable to aUX iN jack on the bottom of the unit.
2. Press the button to turn on the unit.
3. Press the button to switch the sound source to
auX mode, if the unit is not in auX mode.
4. Turn on your external device and press
5. The unit will play back the music from the external device
automatically.
Rukus solaR owner's manual
button.
6