Steelcase Partito Wall Guía Rápida página 4

■
Wall stability rules: Interlinking at a right angle
EN
■
Various cable ducts of two different configurations can be selected for the Partito Wall:
■
Horizontal cable duct
■
Cable duct below table
■
The Partito Wall can be arranged in combination with various accessories:
■
1-rung or 5-rung Orga-Paneel panel which is being incorporated in the wall
■
Shelf of melamine/real wood or TechTop (max. load: 1.4 kg / 100mm of width; maximum of one shelf per side possible)
■
Magnetic board of steel plate with a height of 123mm (can be placed at any vertical position of the frame profile section)
■
Support base (means of stabilisation of free-standing walls and as a finishing element)
The Orga-Paneel panel can only be used starting at a height of 1400mm and with a clearance of
the lower edge of the Orga-Paneel panel from the floor of 900mm. A shelf cannot be used in
conjunction with a horizontal cable duct. A shelf can only be used if the Partito Wall is
interlinked at a right angle.
145000
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Cable duct above table
Vertical cable duct
Vertical cable duct; linear transition at 180°;
P a r t i t o W a l l
■
■
■
■
■
lateral finishing component
Rev. A