Channel Search; Auto Search - Fagor Tedi 5000 HD Manual De Instrucciones

8.- CHANNEL SEARCH
To access the menu, press MENU and select [Search Channel]
using the RIGHT/LEFT keys. This Menu provides options to
adjust the Search Channel settings.
Press UP/DOWN to select an option and press RIGHT/LEFT to
adjust the settings. Press EXIT to exit the Menu

Auto Search

This option will automatically search for channels and save
them. All previously saved channels and setting will be deleted.
Select [Auto Search] and press OK or RIGHT to start channel
search. To cancel channel search, press EXIT. Any channels
that have been found will be saved.
If you don't know the frequency .Automatic search can search
program from the prepared frequency. Program will be saved
when the search is completed.
Manual Search
This option allows you to scan for new channels without dele-
ting previously saved channels and settings.
1. - Select [Manual Search] then press OK or RIGHT. The chan-
nel search screen will appear.
2. - Press the RIGHT/LEFT key to select the channel frequency.
3. - Press OK to start searching channels. If a channel is found,
it is saved.
Antenna Power
You can get 5 VDC from RF input to supply one external an-
tenna.
9.- TIME
Press the ▲/▼ button to select one item.
1. - [Time Offset]: Press the◄/► button to select auto or
manual.
<Auto>: Time Zone will be setted automatically by country
region.
<Manual>: Time Zone will be setted by manual.
2. - [Sleep]: Press the◄/► button to select the sleep time.
3. - [Power On/Off]: Press the OK button into setting window:
3.1. - [Power On]: Press the◄/► button to select Disable or
Enable.
<Disable>: You could not set the power on time.
<Enable>: You could set the power on time.
3.2. - [Power On Time]: Press number key to input time.
3.3. - [Power On]: Press the◄/► button to select Disable
or Enable.
<Disable>: You could not set the power off time.