SRAM PILOT Manual De Usuario página 6

E
NGLISH
7. Install the cable into the housing.
8. Feed the cable and housing into the cable stop on the fork crown.
9. Gently pull on the cable and align it with the groove in the rotating cam of the Motion Control damper.
10. Tighten the cable fixing bolt on the rotating cam to 8 in-lb (.9 Nm)
RockShox forks can be tuned for your pa r t i c u l a r w e i g h t , r i d i n g s t y l e , a n d t e r r a i n .
Adding Air Pressure (Pilot SL and XC)
Remove the air cap located on the left side of the fork crown to expose the air valve.
Using a shock pump with schrader valve, add the recommended air pressure into the
air valve (see Air Pressure Guidelines").
N : M
OTE AXIMUM RECOMMENDED AIR PRESSURE IS
P
ILOT
Motion Control Damping System (Pilot SL)
I N :
MPORTANT OTE WHEN STORING A BICYCLE OR FORK UPSIDE
UPPER TUBE CAN COLLECT ABOVE THE
/
BICYCLE FORK TO A NORMAL RIDING POSITION
BE LESS THAN OPTIMAL
'O '
PEN POSITION AND CYCLE THE FORK THROUGH ITS TRAVEL
'O '
YOUR FORK TO PEN POSITION
The Motion Control Damping system allows riders to quickly adjust the feel and
performance of their suspension to match riding conditions without requiring pumps o r
t o o l s . This system provides for wide-ranging control of compression and rebound
damping as well as 'Lock' threshold sensitivity.
Proper setup of the Motion Control Damping system provides a range of options for
e fficient yet comfortable performance. The instructions below describe setup and
operation for both crown and remote activated forks.
In the 'Open' position, the Motion Control Damping system allows for maximum
compliance and fork movement. The 'Open' position provides ultimate control and
comfort on even the roughest terrain.
6
P
E R F O R M A N C E
XC/SL A
IR
S
TA N D A R D
Rider Weight (lb)
<140 (63 kg)
140-160 (63-72 kg)
160-180 (72-81 kg)
180-200 (81-90 kg)
>220 (99 kg)
L
I G H T
Rider Weight (lb)
<80 (36kg)
80-100 (36-45 kg)
100-120 (45-54 kg)
120-140 (54-63 kg)
>140 (63 kg)
M
OTION
,
INITIAL PERFORMANCE OF THE
. T
O QUICKLY RETURN THE FORK TO PROPER PERFORMANCE
,
KEEP READING
'O ' C
P E N O M P R E S S I O N
SRAM C
ORPORATION
T
U N I N G
50 .
PSI
P G
R E S S U R E
S
P R I N G
Air Pressure
—
0-5 psi
5-10 psi
10-15 psi
15-20 psi
S
P R I N G
Air Pressure
—
0-5 psi
5-10 psi
10-15 psi
15-20 psi
-
DOWN OR ON ITS SIDE
C D
ONTROL AMPER ASSEMBLY
10-20
TIMES
!
(F
IG
• P U
ILOT SER
U I D E L I N E S
,
OIL SEALED IN THE
. U
PON RETURNING THE
M C
OTION ONTROL SYSTEM MAY
,
RETURN THE FORK TO
. F
OR INFORMATION ON RETURNING
. 1 )
954.308981.000, R
M
ANUAL
. B
EV