3. Remove the solution outlet tube fitting from the
valve body.
4. Disconnect the solution inlet hose assembly
from the valve body.
5. Valve body and trigger will now drop free.
6. Insert new trigger valve assembly and reinstall
solution outlet tube and solution inlet hose
assembly.
7. Replace cover.
REPLACEMENT PARTS
The following replacement parts are available from
your Sapphire Scientific distributor:
Description
Trigger and valve body
Glide and O-ring seal
Strainer
Orifice
Nylon washer
SPECIFICATIONS
Sapphire Scientific Upholstery Pro F436-P
Model
Part no. 67-019 67-019-P
Head: 4 in. extraction width
Dimensions
Hose assembly: 10 ft.
Head: High performance copolyester.
Glide: Engineering thermoplastic
Construction
Hose assembly: High-flex vacuum hose
Fittings: Brass with high-temp seals
Specifications are subject to change without notice. Some values
may be approximate.
WARRANTY
Warranty information is available from your Sapphire
Distributor or at LegendBrandsCleaning.com.
07-02087B F436-P
Drawing
Replacement
reference
part no.
Fig. B
13-01690
Fig. B
S13-01705
Fig. D
03-01649
Fig. D
03-01903
Fig. D
03-01652
FIG. E: STEM REPLACEMENT KIT (48-064)
2. Stem.
Periodically
apply grease
here.
3. Trigger lever lock nut
8. Shoulder screw
Warranty registration
Visit LegendBrandsCleaning.com to register your
purchase. Registration allows us to better assist you with
using, maintaining or servicing your equipment, as well
as to contact you in case we have important safety
information concerning your Sapphire Scientific product.
If you determine service is required, have your
equipment model, serial number and original proof of
purchase available and call your distributor for
assistance with obtaining a return material authorization
(RMA).
CONTACT
Sapphire Scientific
2604 Liberator
Prescott, AZ 86301
800-932-3030
WARNING: This product may expose you to
chemicals, including lead and phthalates, known
to the State of California to cause cancer, birth defects,
or other reproductive harm. For more information, go to
P65Warnings.ca.gov
3
1. Stem retention nut
5. Teflon seal
6. O-ring seal
7. Extractor spring
LegendBrandsCleaning.com
4. O-ring seal
Sapphire Scientific