Installing The Overflow Pipe Magazine Sale; Important - Aqua SOFT GREEN TECH Manual De Instalacion Y Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

 Cut the pipe length needed to get to the outlet of the discharge
 Connect the exhaust pipe of regeneration to a drain (better if provided with siphon)
CAUTION: Through the drain pipe is ejected the water used during the
regeneration phase. The water is discharged under pressure. For this
reason it is recommended to properly secure and stable so the pipe to
prevent flooding in the place of installation of the water softener.

INSTALLING THE OVERFLOW PIPE MAGAZINE SALE

 Fix the drain hose to the overflow elbow of the salt (it is recommended to use a hose clamp)
 Connect the hose of the overflow compartment of salt directly to a drain.
CAUTION: The discharge of the overflow is performed by gravity, it is
ESSENTIAL to ensure that the elbow of the overflow of the salt is at a higher
level than the point of entry of the discharge.
IMPORTANT: Do not connect the pipe overflow compartment of salt to the drain of
regeneration with a T or Y. If you do not respect this point, the water sent to the drain at the
time of regeneration can go to fill the salt instead to be expelled.
19

Publicidad

Tabla de contenido
loading

Tabla de contenido