Longshine ShineNet LCS-FS6105 Manual Del Usuario página 3

Introduction
The device is a powerful, high-performance Fast
Ethernet switch, with all ports capable of 10 or
100Mbps auto-negotiation operation
which means the switch could automatically
negotiate with the connected partners on the
network speed and duplex mode. It is ideal for
micro-segmenting large networks into smaller,
connected subnets for improved performance,
enabling the bandwidth demanding multimedia
and imaging applications. Compared to the
shared 10Mbps or 100Mbps networks, the switch
delivers a dedicated 10/100Mbps connection to
every attached client with
congestion issue. This switch also supports auto
MDI / MDI-X function. Each port could be used to
connect to another switch or hub with no
crossover RJ-45 cable.
Store-and-forward switching mode promises the
low latency plus eliminates all the network errors,
including runt and CRC error packets. To work
under full-duplex mode,
reception of the frames can occur simultaneously
without causing collisions as well as double the
network bandwidth.
The switch is plug-n-play without any software to
configure and also fully compliant with all kinds of
network protocols. Moreover, the rich diagnostic
LEDs on the front-panel can provide the operating
status of individual port and whole system.
Before you start to install the switch, check the
following contents in this package：
One NWay switch
One external power adapter
User's manual
2
(NWay),
no bandwidth
transmission and