OBSERVE
A LL LOCAL CODES AND ORDINANCES.
DO NOT, UNDER ANY CIRCUM8TANCE8, REMOVE THE POWER 8UPPLY CORD GROUND PRONG.
ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE.
A 115-volt 60 Hz, AC only, 15A fused and properly grounded electrical supply is required. A time
delay fuse or time delay circuit breaker is recommended.
Use a dedicated circuit, serving only this
appliance.
DO NOT USE AN EXTENSION CORD.
RECOMMENDED
GROUNDING
METHOD
For your personal safety, this appliance must be grounded. This appliance has a power supply
cord with a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged
into a mating grounding type wall receptacle and grounded in accordance with the National
Electrical Code (ANSI/NFPA 70)latest
edition and all local codes and ordinances. If a mating wall
receptacle is not available, it is the personal responsibility and obligation of the customer to have
a properly grounded 3-prong wall receptacle installed by a qualified electrician.
115V~
230V ~
A2222222222222221
fZ
Power cord may include a current interrupter
device. A test and reset button is provided on the
plug case. The device should be tested on a
periodic basis by first pressing the TEST button
and then the RESET button. If the TEST button
does not trip or if the RESET button will not stay
engaged, discontinue
use of the air conditioner
and
contact a qualified service technician.
NOTE:
The shape may be different according to its model.
Use Wall Receptacle
Power Supply
Standard 125V,
3-wire grounding
receptacle rated
15A, 125V AC
Standard 250V,
3-wire grounding
receptacle rated
15A, 250V AC
Standard 250V,
3-wire grounding
receptacle rated
20A, 250V AC
Use 15 AMP. time
delay fuse or 15 AMP
circuit breaker.
Use 20 AMP. time
delay fuse or 20 AMP
circuit breaker.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
-4-