Features - Tripp-Lite PDUB15 Manual Del Propietário

Features

1 5-15R AC Outlets: Connect to 5-15P equipment plugs.
2
5-20R AC Outlets: Connect to 5-15P or 5-20P equipment plugs.
3 L5-30R AC Outlets: Connect to L5-30P equipment plugs.
4 C13 AC Outlets: Connect to C14 equipment plugs.
5 C19 AC Outlets: Connect to C20 equipment plugs.
6 UPS Source Input: Connects to a compatible outlet on the UPS system.
7 Maintenance Bypass Switch: Selects the power source that is powering the load – either the UPS source or the utility source. When the switch
is set to "Utility," connected equipment receives AC utility power from the PDU, but the equipment will not receive UPS battery backup power
in the event of a utility power failure. See "Manual Bypass Operation" for more information.
8 Diagnostic Lights (UPS Available and Maintenance Bypass Available): A green "UPS Available" light will illuminate when the UPS source
is connected and turned on. A yellow "Maintenance Bypass Available" light will illuminate when the utility source is connected and turned on.
9
Utility Source Input: Connects to the utility power source. Models PDUB15, PDUB20 and PDUB30 each have a fixed input cord and plug.
Model PDUBHV10 has a C14 inlet and model PDUBHV20 has a C20 inlet. Models PDUBHV10 and PDUBHV20 both include an extension
jumper and can also be used with a user-supplied power cord. (See below for a selection of compatible Tripp Lite power cords.)
10 UPS Connection Outlet: Connects to the UPS system's input power cord. The user must match the UPS system's input power cord to a com-
patible PDU model.
11 20-Amp Branch-Rated AC Output Breakers (PDUB30 Only): Control power to the PDU's outlets.
PDUB15
PDUB20
PDUB30
12A MAX.
UPS
AVAILABLE
UPS
OUTPUT
TO UPS OUTPUT
12A MAX.
1 6
15A MAX. UPS
AVAILABLE
UPS
OUTPUT
TO UPS OUTPUT
15A MAX.
1 6
11
UPS
AVAILABLE
LOAD1
UPS
20A OUTPUT
OUTPUT 20A MAX.
BREAKERS
PUSH TO RESET
LOAD2
2 11
8 10
MAINTENANCE BYPASS CONNECT UPS
AVAILABLE
LINE CORD HERE
UTILITY
UTILITY
7 9
8 10
MAINTENANCE BYPASS
CONNECT UPS
AVAILABLE LINE CORD HERE
UTILITY
UTILITY
7 9
8 6 10
MAINTENANCE BYPASS
AVAILABLE
TO
30A
UPS OUTPUT
UTILITY
UTILITY
7 9
4
12A MAX.
OUTPUT
12A MAX.
1
16A MAX.
OUTPUT
16A MAX.
2
CONNECT UPS
LINE CORD HERE
30A
OUTPUT
24A MAX.
3