VONROC CR501AC Manual Del Usuario página 8

EN
Disconnecting the air gun (Fig. B2)
When releasing the quick coupler, be sure
to hold the coupling to protect yourself
from injury from the rebounding hose.
• Pull back the sleeve on the quick coupler (6)
and remove the tool.
Using the air gun as blow­out pistol (Fig. C)
This way the air gun (8) can be used for blowing air
for several cleaning purposes and to clear hard- to-
reach areas. The trigger (11) on the gun (8) allows
exact dosing of the air volume.
1. Unscrew the hose (13) from the air gun (8)
2. Replace it by the extension nozzle (12).
Using the air gun for inflating car tires (Fig. C & D)
This way the air gun (8) can be used for inflating
tires, inflatable beds etc.
1. In case the hose (13) is not assembled, connect
it to the air gun (8) by screwing.
2. Connect the air coupler directly to a air valve
of the object to be inflated. To connect: press
the clamp on the hose (13) and push it onto the
valve of the object.
3. First check the pressure of the object.Read the
pressure on the gauge (9):
• Pressure too high: press the button (10) on
the left side to release air.
• Pressure too low: press the trigger (11) to
fill the object till required pressure.
4. Check pressure by releasing the trigger (11)
and read the pressure gauge (9).
5. Disconnect the tyre inflating gun.
Check the service-manual of your car for
the correct tyre pressure of your car.
The manometer (9) is not calibrated! After
inflating tires always check the tire
pressure with a calibrated device, for
example at a petrol station.
Risk of injury! Do not pump any objects up
to more than the intended pressure. They
could burst and cause injury and/or
material damage.
8
Using the adapters for inflating other items (Fig.
C & D)
The air gun (8) comes with several adapter types
(15-20) for inflating all kinds of objects. These
adapters (15-19) can be connected directly to the
air coupler (13). To connect, press the clamp on the
coupler (13) and attach the adapter (15-19) you
want to use.
Ball needle (Fig. C)
The ball needle (15) can be used to inflate balls.
Push the needle (15) into a ball valve and inflate the
ball as described above.
Universal adapter (Fig. C)
The universal adapters (16,18) facilitates easy
inflation of air mattresses, swimming bands etc.
Push one of the adapters (16,18) onto the valve and
inflate as described above.
Valve adapter (Fig. C)
The valve adapter (17) facilitates easy inflation of
bicycle tires. And works well with 'Sclaverand'
valves, race valves and universal 'Dunlop' valves.
Push the adapter (17) onto the valve and inflate as
described above.
Nozzle set (Fig. C)
The nozzles (20) facilitates easy inflation of air
mattresses, swimming bands etc. Push one of the
nozzles (20) onto the nozzle adapter (19) and inflate
as described above.
4. MAINTENANCE
Always disconnect the machine from the
main power supply before carrying out any
maintenance work.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and dirt.
Remove very persistent dirt using a soft cloth mois-
tened with soapsuds. Do not use any solvents such
as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.
WWW.VONROC.COM