ASROCK K10N780SLIX3-WiFi Manual De Instrucciones página 29

on
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
ATX 12V Power Connector
(8-pin ATX12V1)
8
(see p.2, No. 2)
4
Though this motherboard provides 8-pin ATX 12V power connector, it can still
work if you adopt a traditional 4-pin ATX 12V power supply. To use the 4-pin ATX
power supply, please plug your power supply along with Pin 1 and Pin 5.
IEEE 1394 Header
(9-pin FRONT_1394)
(see p.2 No. 26)
Serial port Header
(9-pin COM1)
(see p.2 No.24)
HDMI_SPDIF Header
(3-pin HDMI_SPDIF1)
(see p.2, No. 29)
ASRock K10N780SLIX3-WiFi
20-Pin ATX Power Supply Installation
Please note that it is necessary
to connect a power supply with
5
ATX 12V plug to this connector.
1
Failing to do so will cause power
up failure.
4-Pin ATX 12V Power Supply Installation
Besides one default IEEE 1394
port on the I/O panel, there is one
IEEE 1394 header
(FRONT_1394) on this
motherboard. This IEEE 1394
header can support one IEEE
1394 port.
This COM1 header
supports a serial port module.
HDMI_SPDIF header, providing
SPDIF audio output to HDMI VGA
card, allows the system to
con nect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
Motherboard
12 24
1 13
8 5
4 1
2 9 2 9 2 9 2 9 2 9