Parkside PSHL2 B1 Instrucciones De Funcionamiento Y De Seguridad página 56

Safety instructions
Do not use any alcohol, fuel
„ „
or diluting agents to clean the
ADF filter. Do not place the
ADF filter in water.
The response time of the ADF
„ „
liquid crystal slows down if the
ambient temperature is lower,
however this does not have an
impact on the protective func-
tions.
Please replace the housing
„ „
of the ADF filter immediately
if it is damaged or scratched
because this can impair visi-
bility and the protective perfor-
mance.
Please replace the viewing
„ „
pane immediately if it is bro-
ken or scratched. Do not use
any hard objects to replace
the viewing pane of the filter.
Regularly clean the surfaces
„ „
of the ADF filter, sensor and
solar cells.
The welding helmet cannot
„ „
withstand any damages that
are caused by a heavy blow,
explosion or abrasive liquids.
The useful life depends on
„ „
many different individual fac-
tors such as usage, cleaning,
storage and maintenance.
Regular inspections and re-
placement in the case of dam-
age are recommended.
The material used to manufac-
„ „
56 GB/MT
All manuals and user guides at all-guides.com
ture the product will age over
time. This can result in break-
ages on the welding helmet,
for example. As a result of
these damages, the welding
helmet is no longer able to
provide effective protection.
In this case, the user should
replace the welding helmet im-
mediately.
This product cannot be used
„ „
for overhead welding work
and cutting operations. If
this product is use for over-
head welding or cutting, the
molten metal drops could burn
through the ADF filter and re-
sult in injuries to the user.
If the filter is faulty, the user
„ „
must stop using the weld-
ing helmet immediately. Slag
splashes can damage the sur-
face of the filter and cause in-
jury to the user's skin or cause
other serious accidents.
This product is temperature re-
„ „
sistant and hardly inflammable
but in case of direct contact
with naked flames or in case
of access to an object with a
high temperature, the helmet
may begin to burn or melt.
Please store and only use the
welding helmet in the manner
described in order to reduce
such risks.