Safety Harness; Care And Maintenance - Kinderkraft INDY Manual De Usuario

EN
The footmuff has four Velcro fasteners on the underside (FIG. 12A). In order to attach
the cover, use the Velcro fasteners on the seat frame tubes (FIG. 12B).
Installation of the rain cover − FIG. 12C.
VI USE OF BRAKE
The buggy is equipped with a foot brake located on the right side of the rear axle.
Press the lever, and the brake is activated when you hear the locking sound (FIG. 13).
Unlocking occurs after lifting the brake lever.
VII BACKREST AND FOOTREST ADJUSTMENT
The seat is equipped with smooth backrest adjustment system, from a lying to a
sitting position, using a clasp. Pull the free end of the belt to lift the backrest
(FIG. 14A). To lower the backrest, press the button on the clasp and slide it towards
the end of the belt (FIG. 14B).
The footrest is adjusted by two buttons at its bottom (FIG. 15).
VIII SAFETY HARNESS
The buggy's harness is adapted in such a way to enable its use even by newborns.
Always use the fastening system.
To secure the child, connect the latches of the lap and shoulder straps (FIG. 16A) and
then insert them into the central buckle until it engages (FIG. 16B). Adjust the straps
each time.
The straps can be adjusted using the plastic clasps located under the shoulder pads
(FIG. 17A). The shoulder pads are attached to the straps with press studs.
The metal clasps under the shoulder pads allow disconnection of the shoulder straps
from the backrest (FIG. 17B).
IX PLACING AND TRANSPORT OF THE BUGGY
In order to fold the frame you must first move the slider, and then press the lock
button (both elements are located on the parent handle) (FIG. 18). Next follow the
arrows (FIG. 19).
X CARE AND MAINTENANCE
The buyer is responsible for proper installation of all functional elements as well as
for carrying out all required maintenance and adjustments in order to keep the buggy
in good technical condition.
The buggy must be periodically checked for potential problems. Significant measures
to be applied to ensure the child's safety and prevent shortening of the product life
have been presented below:
22