SilverCloud MB23 Manual De Usuario página 3

Important information:
ú
Please read this instruction manual thoroughly so that you completely understand the
operations, cautions, performance and limitations with this monitor. After reading this
manual, please keep it for future reference.
ú
You should not use this blood pressure monitor for self-diagnosis, self-treatment or to
change medication without consulting your physician or other health care professional.
Should you have any doubt or question about your blood pressure measurements, you
should consult your physician or other health care professional
ú
This device is contained high-precision parts; therefore, avoid exposing it to extreme
temperature or humidity or to direct sunlight, shock and dust. Fudakang guarantees the
accuracy of this monitor only when it is stored and used properly.
ú
Do not attempt to calibrate or repair this monitor. If you have any questions regarding the
function or operation of this monitor, please contact our service agent so we can provide you
with accurate information.
ú
Should the monitor or cuff need cleaning, use a dry, soft cloth or a cloth dampened with water
and a mild detergent.
ú
Remove and replace the batteries if the monitor is not used for more than 6 months. Alkaline
batteries recommended.
Precaution for use:
SilverCloud MB23 Automatic Blood Pressure Monitor is designed to be operated by anyone
who is eighteen years and older or by medical professionals to monitor blood pressure
(systolic and diastolic) and pulse rate.
Before you start:
Please make sure you have installed 4 AA (1.5 volt) batteries (alkaline batteries
recommended), or use the AC-DC Adapter and attach the cuff to the monitor before using it. To
install batteries (or replace them if the "Low Battery" symbol appears on display), proceed as
follows:
NOTE:
When the LCD display shows "Low Battery" signal
Ÿ
accurate readings.
Do not use rechargeable batteries with a voltage of 1.2Veach because they are not suitable
Ÿ
for this product and will cause inaccurate readings.
Remove the batteries if the monitor will not be used for six month or longer to avoid damage
Ÿ
from the possibilityof leaking batteries.
All the measurements will remain in the memory should the batteries become drained,
Ÿ
removed, or replaced.
ú
Remove the battery compartment cover by gently pushing down
on arrow and sliding cover forward
ú
Place batteries with positive "+" and negative "-" terminals into
compartment and make sure they matched the indicated
terminals in the compartment.
ú
Close the battery cover by gently sliding it into the compartment
and pressing it into place.
the batteries must be replaced for
3