Samsung DMT400 Manual Del Usuario página 25

pROblem
does not have a
smoothly rotating
nozzle.
water won't
pump out of the
dishwasher.
has a bent upper
rack after loading
dishes.
pOSSIble CAUSe
The nozzle hole is clogged with
food particles.
The nozzle is blocked by a dish or
pot and cannot rotate.
Drain is clogged.
The dishes are not loaded
properly.
SOlUTION
Clean the nozzle hole.
After placing the dishes into the racks,
rotate the nozzles by hand to check
whether any of the dishes will interfere with
them.
Contact a qualified service technician to
remove any obstruction from the drain hose
and check the drain pump operation.
Load your dishes as recommended.
(See page 16.)
troubleshooting _25