Appendix; Specifications; Label Types - Oki LD630D Guia Del Usuario

7. Appendix

7-1 Specifications

Item
Printing Method
Dot Density
Printer
Printing Width
Printing Speed
Paper
Input Voltage
Frequency
AC
Adapter
Output Voltage
Output Current
Temperature
Usage
Conditions
(except for paper)
※ Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is for indoor use and all the communication wirings are limited to inside
of the building.
- The switch is the disconnecting device. Turn off switch from any hazard.

7-2 Label Types

The label types used with this printer are as follows.
• Control Labels: PP
• Other Labels: PET
Direct Thermal Printing
LD630D : 203 dpi (8 dot/mm)
LD640D : 300 dpi (11.8 dot/mm)
LD630D : Max. 108 mm(Max. 4.25")
LD640D : Max. 105.7 mm(Max. 4.16")
LD630D : Max. 165 mm/sec (Max. 6.5ips)
LD640D : Max. 102 mm/sec (Max. 4ips)
Width 20 ~ 110 mm(0.79 ~ 4.33")
Max 130mm(Max. 5.12")
Roll
25.4 ~ 38.1mm (1 ~ 1.5")
Core
AC 100~240V
50/60 Hz
DC 24V±5%
2.5A
5 ~ 40 ℃ (Operating)
-20 ~ 60 ℃ (Storage)
Humidity 10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
Description
- 35 -
LD630D/LD640D