EcoxGear EcoXplorer GDI-EXPLR100 Manual De Instrucciones página 7

EcoConnect - Wireless Stereo
Connection of Two Speakers
When you have two EcoXplorer speakers and want to wirelessly pair them
for stereo sound, first follow the Pairing a Bluetooth Device instructions
to connect one EcoXplorer speaker to your Bluetooth device. Leave this
EcoXplorer speaker powered on and connected to your device.
Next, place the two EcoXplorer speakers next to each other and turn on
your second EcoXplorer speaker. Once the second speaker is powered on
(the Bluetooth light will be flashing), press the EcoConnect Button
on both of your EcoXplorer speakers. Wait a few seconds for the speakers
to wirelessly connect. Both speakers will announce "Connection
successful, speakers paired" and the LED EcoConnect Indicator on both
units will light up blue once the connection is completed.
Once the two EcoXplorer speakers are connected via EcoConnect, start
playing music from your device. Both connected EcoXplorer units will play
the music from you device.
The EcoConnect default has your speakers playing in stereo mode. If you
would like to change which speaker is left or right or if you want to set
each speaker to play in mono mode you can press and hold
press and hold of will change the speaker from RIGHT / LEFT to
LEFT / RIGHT to MONO.
13
The EcoConnect connection between the two EcoXplorer speakers will
NOT automatically re-connect after the speakers are turned off. To
re-establish EcoConnect between the speakers, after power off, please
follow the above steps.
Notes:
· You can also pair the EcoXplorer with any other ECOXGEAR speaker
bearing the EcoConnect symbol
· The EcoConnect functionality is only available while using Bluetooth as
your audio source at a maximum range of 30 feet between both of the
paired speakers.
· While pairing the two EcoXplorer speakers, make sure that the
speakers are within a few feet of each other.
. Each
.
14