1. VISTA DEL EQUIPO
AD-2N Is an Ethernet to DMX Bi-directional converters. Provide two network Art-Net to DMX512 two-way
conversion capabilities. Equipment uses high-speed ARM processors, follow the standard Art-Net Protocol,
provide RJ45 network interfaces and standard DMX512 input/output interface. ArtNet-DMX2 highly compliant
protocol standards, real-time, stable and reliable.
AD-2N Factory configuration IP Address 2.xxx And subnet mask 255.0.0.0 , no need to modify, . Special network
configuration can use PC configuration tools and WEB browser changes.
Input/output mode decide by switches of the Panel.
Can refer to device Panel configuration form.
1.1. Input mode
Traditional console input mode change DMX Signal into Art-Net Signals transmitted over the Ethernet. Just like
a standard Art-Net console; Can control all the Art-Net node which connected to the same UNIVERSE on the
network.
This model can let traditional DMX device being networked , saving investment, have great economic benefits.
1.2. Output mode
Output mode can receive the same UNIVERSE Art-Net Message and convert DMX512 Signal to directly control the
DMX Equipment.
1.3. Configuratión
ArtNet-DMX2 Can be configure the device by PC and WEB browser .
Art-Net standard IP addresses, can be set to 2. x. x. x(subnet mask 255.0.0.0) 10. x. x. x(subnet mask 255.0.0.0). If
the console has a special setting, you can change the device IP to the same network segment.
IP Address have four modes :2.x.x.x Automatic, 10.x.x.x
Automatic, DHCP , User-defined patterns. First two
IP addresses automatically, the subnet mask for the
255.0.0.0,DHCP address by the DHCP Server to assign, can
setting
be customized as needed . please Configure to
communicate with devices in the same network segment.
Art-Net identify the node By UNIVERSE , setting in the
range for 0~255 ; this device UNIVERSE count from 0, some
equipment start from 1.
User Manual | ArtNET-DMX 1 Triton Blue | Rev. June 2018 | www.triton-blue.com
10.