Denon Professional DN-300BR Guia Del Usuario página 3

Features
Front Panel
1
1. Power Button: Press this button to turn the unit on or off. Make sure the AC In is properly
connected to a power outlet.
2. BNC Antenna Terminal: Connect the included removable Bluetooth antenna to this
BNC connector. The antenna receives and transmits the Bluetooth signal from a paired
Bluetooth device. DN-300BR has a range of up to 100 feet (33 meters).
3. Status Light: This LED indicates the DN-300BR's Bluetooth pairing status:
•
Flashing slowly (approximately twice every 2 seconds): DN-300BR is not paired to a
Bluetooth device.
•
Flashing quickly (approximately twice per second): DN-300BR can be paired to a
Bluetooth device.
•
Solidly lit: DN-300BR is paired to a Bluetooth device.
See Operation
4. Pair Button: Press and hold this button for 3 seconds to make DN-300BR available for
pairing to a nearby Bluetooth device. See
5. Level Knob: Turn this knob to adjust the output volume level (sent to the balanced and
unbalanced outputs).
Rear Panel
1
1. BNC Antenna Terminal: Connect the included removable Bluetooth antenna to this
BNC connector. The antenna receives and transmits the Bluetooth signal from a paired
Bluetooth device. DN-300BR has a range of up to 100 feet (33 meters).
2. Remote Pairing Connector: Use the included 2-pin Euroblock connector to add a remote
pairing button (not included) to this connector.
3. Outputs (Balanced XLR): These outputs send the audio from a paired Bluetooth device.
Use XLR cables to connect these outputs to your loudspeakers, mixer, etc. See
more information.
4. Outputs (Unbalanced RCA): These outputs send the audio from a paired Bluetooth
device. Use standard RCA cables to connect these outputs to loudspeakers, mixer, etc.
See Setup for more information.
5. AC Input: Use the included power cable to connect this input to a power outlet. See
Setup for more information.
6. Fuse: If the fuse blows, replace it with a fuse of the same type. Using a fuse with an
incorrect rating can damage the unit and/or fuse.
2
to learn how to pair/unpair a Bluetooth device to/from DN-300BR.
2
3 4
Operation for more information.
3
5
6
4
5
Setup for
3