Terminate A Pairing Partnership; Change Your Device's Bluetooth Name - ViewSonic VSD241 Guia Del Usuario

5
You may be prompted to enter a password to authenticate. Enter the
same password on both devices, or enter the password provided by
the device manufacturer. Ensure that you read the documentation of
the pairing device to check if it requires a default password.
6
When the pairing is successful, paired but not connected devices are
displayed under the "PAIRED DEVICE".
NOTE
1. The message indicating successful pairing may vary depending on the type of the
paired device.
2. Pairing is a one-time process. Once your device successfully pairs with another device,
your device recognizes that device without the need to re-enter the password.

4.6.3 Terminate a pairing partnership

1
Touch the Home button│ Settings │ Bluetooth.
2
Under the Paired devices section, touch the icon next to a paired
device.
3
Touch Unpair to erase all pairing information with that device. You need
to re-enter the password if you want to restore a Bluetooth connection
to that device.

4.6.4 Change your device's Bluetooth name

1
Ensure that you have turned on Bluetooth
on your device
(Icon in the status area of the system bar
indicates that Bluetooth is enabled).
2
Touch the Home button│ Settings │ Bluetooth.
on the upper right-hand side of the screen to rename your smart
display.
3
Enter a name to identify the device when you connect using Bluetooth.
4
Tap Rename. Your device's Bluetooth name has been changed.
Using Your VSD241 Smart Display
Tap the Menu button
25