Cleaning, Care And Maintenance; Troubleshooting - Waring Commercial WVS50 Manual De Usario

CLEANING, CARE AND MAINTENANCE

Always unplug the appliance before performing any cleaning
and maintenance operations.
NOTE: Be sure to wash all parts thoroughly to avoid food-
borne illness.
1. Rotate the suction base to the unlock position and pull it
outward to remove. Rinse the suction base with warm soapy
water.
2. The rubber inner suction nozzle is removable for cleaning.
Wash with warm soapy water.
3. Clean The Pistol Vac charging base and the suction base
with a non-abrasive cloth.
4. Ensure that parts are completely dry before reassembling.

TROUBLESHOOTING

NOTE: If the appliance has not been used for a long time, you will
need to recharge it before use.
If nothing happens when you pull the trigger, you may need to do
the following:
1. Be sure that the unit is charged.
2. Check the appliance parts to be sure that they are not
loose. If they are loose, tighten them and resume the sealing
process.
The unit will not charge:
1. Check that the unit is properly connected with the charging
base so that the LED is illuminated.
2. Be sure that the electric outlet is working properly.
3. Be sure you are using the provided battery charger, model
number YLS0301A-T075250, to charge the unit.
It does not work right after being charged:
1. Make sure the LED lights are illuminated during charging.
If not, properly connect The Pistol Vac to the charging base
so that the lights are illuminated.
8