Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. RESTORING DEFAULT PARAMETERS & UPDATING FIRMWARE
In order to restore default parameters, EWKB5 must be powered on either by the main
power supply or by battery power.
RESTORING DEFAULT PARAMETERS
1. Press and hold the RESET button for 10 sec.
2. Watch the red indicator flash several times.
3. Release the RESET button.
4. Parameters restored to default values.
+
+
+
UPDATING FIRMWARE
1. Power up EWKB5.
2. Transfer the firmware .bin file from your computer to the microSD card, while
creating a new folder "firmware" beforehand (the ultimate file path should be: SD
--> Firmware--> .bin file).
3. Insert the microSD card into the card slot of EWKB5.
4. Watch the on-screen progress and wait until it is complete.
5. Firmware updated.
-
-
-
8
EN
-
-
-
-
-
-
+
+
+
+
+
+
ELDES WIRELESS TOUCHPAD EWKB5
Publicidad
Tabla de contenido
