Publicidad
Idiomas disponibles
Idiomas disponibles
Setup
Setup
·
Connect the power adaptor to the base unit (13).
·
Install the battery into the headset if not tted.
·
The headset LED (1) will turn on for about
2 seconds then turn o . Now your headset is in
standby mode.
Connecting to a telephone with a headset port
·
Connect the 'TEL' port (15) on headset base with
the headset port on your telephone.
·
Use the power adaptor to connect the headset
base (13) to a power socket.
Connecting to a telephone without a headset
port
·
Connect the 'TEL' port (15) on headset base with
the 'handset' port on your telephone.
·
Connect the telephone handset cord to the
handset port (14) on the headset base.
·
Use the power adaptor to connect the headset
base (13) to a power socket.
Connecting to a compatible handset lifter
·
Fit the handset lifter to your telephone
·
Connect the handset lifter to the 'AUX' port (12)
located on the back of the headset base.
Connecting to a computer USB port
Connect the USB cable supplied with the product to
the 'USB' port (11) on the back of the headset base
and to a available USB port on your computer.
Publicidad
