Maytronics DOLPHIN SUPREME M5 User Instructions página 6

English
Turning the Dolphin ON
1. Plug the floating cable from the
Dolphin into the power supply unit.
2. Plug the electrical cable from the power
supply unit into the mains.
3. Press on the ON/OFF switch.
4. The Dolphin will now start to work.
Note: If your model includes the remote control unit, please refer to the included instruction leaflet.
Part 3 - Taking the Dolphin out of the water
Unplug power supply before any servicing activity.
1. If the Dolphin has not finished its cycle, turn off the power
supply unit and unplug the mains.
2. Pull the floating cable gently until the Dolphin has risen
to the surface, then lift by the handle.
Important: DO NOT enter the swimming pool while the pool cleaner is working.
Important: Do NOT lift the Dolphin from the water by its cable.
Floating cable
On/Off
switch
4