OxyGo NEXT Manual Del Usuario página 10

6. Connect the nasal cannula tubing
to the nozzle fitting. Nozzle fitting is
located on the top of the OxyGo NEXT.
Use of a single lumen cannula up to
25 feet in length is recommended to
ensure proper breath detection and
oxygen delivery. Additional titration
may be needed to ensure proper
oxygen delivery when using a particular
cannula, consult your physician.
7. Turn on your OxyGo NEXT by pressing
the ON/OFF Button. A single short beep
will sound after poweing on. Please
wait icon (
concentrator starts up. The display will
indicate the selected flow setting and
power condition. Following a brief
start-up sequence, a warm up period
up to 2 minutes will initiate. During this
time period the oxygen concentration
is building to but may not have reached
specification. Additional warm up time
may be needed if your OxyGo NEXT
has been stored in extremely cold
temperatures.
8. Set the OxyGo NEXT Concentrator to the
flow rate prescribed by your physician or
clinician. Use the + or – setting buttons
to adjust the OxyGo NEXT to the desired
setting. The current setting can be
viewed on the display.
9. Position the nasal cannula on your
face and breathe through your nose.
The OxyGo NEXT will sense the onset
of inhalation and deliver a burst of
oxygen at a precise time when you
inhale. The OxyGo NEXT will sense each
breath and continue to deliver oxygen
in this manner. As your breathing rate
changes, the OxyGo NEXT will sense
these changes and deliver oxygen only
as you need it. At times, if you inhale
very quickly between breaths the OxyGo
NEXT may ignore one of the breaths,
giving the appearance of a missed
breath. This may be normal as the
OxyGo NEXT senses and monitors the
changes in your breathing pattern.
The OxyGo NEXT will normally sense
the next breath and deliver oxygen
accordingly.
7
) will appear while the
5., 6.
7., 8.