Product Safety Information; Product Specifications - Ingersoll Rand 200G Informacion De Producto

Product Safety Information

Intended Use:
Paint Sprayers are designed for paint, lacquer, stain or other finish type material.
For additional information refer to Product Safety Information Manual Form 16576563.
Manuals can be downloaded from www.ingersollrandproducts.com.

Product Specifications

Model Description
Touch-Up Gravity
200G
Feed Spray Gun
Gravity Feed
210G
Spray Gun
HVLP Gravity
270G
Feed Spray Gun
Suction Feed
210CSA
Spray Gun
Operations
Spray Gun Handling
Do not point the spray gun at anyone or at any part of the body.
Ensure appropriate air line filter is being used. Water, oil, and debris in the air may cause
damage to the workpiece.
The spray gun should be held perpendicular to the work surface and 6 to 12 inches from the
work surface. Keep the gun parallel to the work surface during the stroke to ensure even coating.
DO NOT move the gun in an arc. This will result in a build up of paint in the center of the stroke
and a light coating at each end.
Start the gun moving prior to pulling the trigger and release the trigger before stopping the gun
movement. Overlap strokes enough to get a uniform finish.
(Dwg. TP2049)
47083068_ed1
Maximum Average Air
Air Pressure Consumption
35 psig 5 cfm
[2.4 bar] [140 l/min]
60 psig 11 cfm
[4.1 bar] [300 l/min]
40 psig 8 cfm
[2.8 bar] [235 l/min]
60 psig 12 cfm
[4.1 bar] [340 l/min]
WARNING
NOTICE
(Dwg. TP2053)
Tool
Weight Capacity
1.2 lbs 4.2 oz
[0.52 kg] [125 cc]
2.6 lbs
[1.2 kg] [600 cc]
2.7 lbs
[1.3 kg] [1,000 cc]
1.5 lbs
[0.62 kg] [1,000 cc]
Fan Direction
Air Cap
EN
Cup Fluid
Nozzle Size
0.03 in
[0.8 mm]
20 oz 0.05 in
[1.4 mm]
33 oz 0.06 in
[1.5 mm]
33 oz 0.07 in
[1.8 mm]
Lock Ring
EN-1