bq Witbox Guía Rápida página 40

ENGLISH
SAFETY PRECAUTIONS
Please observe these safety precautions when
using your Witbox.
· Do not use cables, connectors or plugs that
are damaged or loose. Do not bend or damage
the power cable, touch it with wet hands or
pull on it in order to unplug the printer.
· Witbox reaches high temperatures and has
moving parts that are capable of causing
injury when in operation. Do not touch any
part of the interior of the printer or the
extruder while it is printing, as they may be
extremely hot.
· If you need to access the interior of your
Witbox, please observe the following:
- Make sure the printer is fully
- Leave the printer to cool if it has
- Close the safety door at the front
switched off; i.e. the switch is in the
Off position and the power cable is
unplugged from the mains.
been used recently.
while the printer is being used, and
keep it shut when the unit is not
being used.
41