Ordinary Maintenance
It is advisable, after installation, to carry out checks on the moving parts, at least every 6 months:
•
Check the balance of the arm ( if necessary rebalance the arm adjusting the screwable
rods).
•
Check the correct alignment of the arm.
Every 500,000 manoeuvres carry out a revision of the following parts.
•
Replace the rubber antivibration drums
•
Check that the spring is balanced
•
Check that the body of the barrier is securely grounded, check that the arm is still tightly
attached and check that the motor is still securely fixed.
•
Check the relative functionality of the control panel and the safety accessories.
Fixing optional accessories
Fixing the photocell
Istruzioni Instructions Anleitungen Instrucciones Инструкция
1
2
Fixing the digital or key pad
Manual Manoeuvre
•
The manual manoeuvring of the arm should
only be carried out when the motor has
stopped due to a cut in the power supply
•
Pull off the self releasing cylinder (1) and with
the Alan key (2) unblock the motor turning
the key in an anticlockwise direction.
•
Warning! Do not carry out the manual
manoeuvring if the arm is not fixed to the
motor.
1
2
14