TMC Aquarium V2 Skim Pro Manual De Instrucciones página 3

2
V
Skim
INSTRUCTIONS FOR INSTALLATION AND USE
Important Safety Information - Please Read Carefully
• This skimmer is supplied with a high performance pump. Please read carefully
the safety information supplied with the pump before installing.
• Always isolate the pump from the mains electricity before installing or carrying
out any maintenance to the skimmer.
• Power to the pump must be supplied through a Residual Current Device (RCD) with a
rated residual operating current not exceeding 30mA.
• The pump is designed to run completely submerged in water - do not run the pump dry.
• To ensure the pump continues to maintain a steady water flow, it must be cleaned
regularly to ensure it does not become clogged with debris or detritus.
• The venturi will also need to be cleaned frequently to ensure stable air and water flow.
• Pump rating: 230-240V, 50Hz unless marked otherwise.
• Do not operate any appliance if it has a damaged cord or plug, if it is malfunctioning, or
if it has been dropped or damaged in any way.
• This unit is designed to be used indoors and is not suitable for any outdoor
applications.
• Ensure the skimmer is securely installed before operating.
• Always leave a drip-loop in the pump cable to prevent water running down
the cable and reaching the power source (see picture below).
• Dispose of this unit responsibly. Check with your local authority for disposal
information.
Pro
Protein Skimmers
Drip-loop
1