Removing The Hdd From A Playstation Console - Sony PS2 Guía De Instalación Del Hardware

Removing the HDD from a PlayStation
12
1
Check that the 1 (standby) indicator on the PlayStation
up in red. Then, turn off the console using the main power switch on the
console rear.
2
Disconnect the power plug for the console from the electrical outlet.
3
Loosen the mounting screws of the network adaptor.
Using a coin, turn the mounting screws in a counterclockwise direction.
Note
Do not use a screwdriver to loosen the mounting screws.
Network adaptor
Mounting screw
4
Remove the network adaptor from the console and HDD.
Remove the network adaptor by pulling it away from the console. Note that the
HDD remains in the console.
2 console (continued)
®
2 console front is lit
®
PlayStation 2
®
console rear