Publicidad
Enlaces rápidos
Multi-Use Baskets
Install Sheets
Multi-Use Baskets MU & USB
Multi-Use Baskets with Handles & Accessory Baskets
Multi-Use Baskets
Multi-Use Baskets MU & USB
Multi-Use Baskets with Handles & Accessory Baskets
Multi-Use Baskets
Multi-Use Baskets MU & USB
Multi-Use Baskets with Handles & Accessory Baskets
Multi-Use Baskets
(ENG)
(ENG)
(ENG)
(FR)
(FR)
(FR)
(SP)
(SP)
(SP)
Publicidad
Resumen de contenidos para Knape & Vogt MU11
- Página 1 Multi-Use Baskets Install Sheets Multi-Use Baskets MU & USB (ENG) Multi-Use Baskets with Handles & Accessory Baskets (ENG) Multi-Use Baskets (ENG) Multi-Use Baskets MU & USB (FR) Multi-Use Baskets with Handles & Accessory Baskets (FR) Multi-Use Baskets (FR) Multi-Use Baskets MU & USB (SP) Multi-Use Baskets with Handles &...
-
Página 3: Installation Instructions
Multi-Use Basket with Handle and Accessory Basket Installation Instructions Inspect all parts and read all instructions prior to beginning assembly and installation. NOTE: Basket can be installed with top basket on right hand side or left hand side. Determine which orientation is best for your installation. Be sure to install slides as described below with wheels to the rear of the basket as you wish it to be installed. - Página 4 Multi-Use Baskets Installation Instructions Inspect all parts and read all instructions prior to beginning assembly and installation. With a pencil make a mark 1-1/4" back from the front outside edge of the cabinet. Place the sliding basket assembly with the front edge of the front mounting strap directly behind this line. With a pencil mark the cabinet floor through the front two mounting hole locations. Remove the basket from the cabinet. With 1/16" drill bit drill pilot holes through the two mounting hole locations you marked. Parts Included Pull the multi-use basket completely forward. Place the entire assembly back inside of A. Sliding Basket Assembly the cabinet so that the front mounting holes line directly over the pilot holes you drilled B. (4) Mounting Screws in the cabinet floor. Fasten the front mounting strap to the cabinet floor using two mounting screws. Now that the front mounting strap is mounted to the cabinet floor drill pilot holes in through the rear mounting hole locations with the 1/16" drill bit. Fasten the rear mounting strap to the cabinet floor using two mounting screws. Push the multi-use basket all the way back into the cabinet. Installation is now complete.
- Página 5 Assemblages Ensamblaje de productos MU11 MU14 USB11-TM-R USB14-TM-R USB11TM* USB14TM* * Panier supérieur inclus. * Contiene una canasta superior.
- Página 6 Panier avec poignée à usage Canasta multiuso con asa y multiples et panier accessoire canasta para accesorios Instructions pour l’installation Instrucciones de instalación Inspecter toutes les pièces et lire Revise todas las partes y lea por comple- les instructions avant de débuter to las instrucciones antes de comenzar a l’assemblage.
- Página 7 CORBEILLES Liste des pièces CESTAS DE MÚLTIPLES USOS A. Ensemble de corbeille MULTI-USAGES coulissante Instrucciones de Instalación B. (4) Vis de montage Instructions relatives à l’installation Inspeccione todas las piezas y lea todas las instrucciones antes de comenzar Inspectez toutes les pièces et lisez toutes Lista de partes con el armado y la instalación.