Heating Performance P; Bake Function - Krups FBC 2 Manual De Instrucciones

English
Heating performance
This toaster oven employs Krups patented Expert Quartz Cycling Technology™. The top 3 heating
elements and bottom 3 heating elements are powered alternately at full power to heat food more
quickly and provide ultra precise temperature control. Monitor results carefully as cooking time can
be reduced by as much as 30%.
It is normal for one set of elements to turn off while the other set is heating at full
power.
The ends of each heating element will glow more brightly than the middle of the
element. This is normal. The elements are specially designed to produce a balanced
level of heat throughout the chamber.
During baking, quartz elements heat even if they are not lighting up.

BAKE function

Never leave unattended during use.
Changing the temperature or cooking time:
• You can change the cooking time or temperature at any time during a baking cycle.
• Press « Timer » or « Temp » and use the « + » and « - » buttons to change settings.
• Press « Timer » or « Temp » again to confirm the new setting.
10
Select the temperature:
• Press the "Bake" button. The "Bake" indicator lamp will light.
• The default temperature of 350°F will be shown blinking on the
display.
• Press the "+" and "-" buttons to select the desired temperature.
The temperature can be changed in steps of 25°F.
• The display will continue to blink.
Select the cooking time:
• Press the "Timer" button.
• The default cooking time of "0:30" (30 minutes) will be shown
blinking on the display.
• Set the cooking time according to your recipe by pressing the "+" and
"-" buttons, up to a maximum of 1 hour 30 minutes.
• Press "Start". The appliance will beep and cooking will start.
• The time will be counted down in one-minute intervals.
• At the end of the cooking time, the appliance will beep five times
and cooking will stop.
• You can stop the cooking at any time by pressing the "Stop"
button.